ECU DATA
EDC15 ecu
Processor: Siemens C167CR
Stock chip:
356763 -l
356764 -h
Chip specification:
rewrite chip: replace stock chips with this - AMD "am29f010"
-the stock chipset can't be rewritable.
Software version: 001834
Ecu: 8d0907401h
Bosch: 0281001834
Map address:
Fuel maps:
03e44 - torque limiter
0be44 - torque limiter
3be44 - torque limiter
02066 - EGR may be
029f0 - EGR may be
04228 - driver whish (tps) may be
Turbo maps:
04ff4 - turbo boost may be
0cff4
053a2 - boost limiter
0d3a2
If you have 2 or 3 same maps on other address, the ecu use map for your configuration, front wheel, quattro, automatic transmission. You set all same maps with your custom values.Any software make this automatic like ECM Titanium.
If you want to upload already tuned files to your ecu, this can by impossible, the maps in tuned files must be the same number as original, when you open your files with WinOLS and set your credentials auto data to winols. DON'T USE WinOLS cracked version from network! If you have cracked version, you don't have many differences functions from free version. WinOLS check online, if you have license for their latest version of WinOLS and send you checksum for found map address for any ecu. If you don't have license for latest version you dont get any data for map name and extended manual, but you have free manual for WinOLS from EVC oficial website.
WinOLS give you number of potential maps in left column this must be same as tuned files.
EDC15 for 2.5 TDI have a 2 flash memory chips, L and H.
For download the 2 map files you must be used Willem programmer
If you want to edit ecu map files you must be join this 2 files in one with your tune software, WinOLS, ECM Titanium, etc. After edit maps, you must be split file, to L and H, the software set automatic their names to L and H.
